Face-Down Stacker Cover Assembly - OKIDATA OF1000 Service Manual

3.2.42 Face-Down Stacker Cover Assembly

1. Perform these procedures:
3.2.01
3.2.02
3.2.09
3.2.15
3.2.16
2. Disconnect the LED cable (1).
3. Press the extensions (2) in the direction of arrows A and release the face-down stacker cover
assembly (3) from the reset levers (4). There are also two points (5 - location only) on the inside
of the assembly which must be disconnected from the base frame.
4. Remove the assembly.
NOTES:
The LED Cable connects the LED Head to CN 4 of the PCNT board.
Lubrication
Lightly lubricate the reset levers.
details .
P/N 53069001 Assembly: Face Down
P/N 56629101 Cable: LED-PCNT
P/N 50104801 Tray: Stacker Cover
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Refer to Section 3.5 of this Service Handbook for lubrication
RSPL B.2.04
B.2.17
RSPL B.2.04
Stacker Cover
Page: 108