Technical Function (Tf) Listing - OKIDATA OF1000 Service Manual

Technical Function (TF) Listing

TF Name
No
.
01 Line Monitor Control
02 Automatic Protocol
Dump Select
03 Automatic MCF
printout upon
detecting a
communication error
04 TSI Print
05 Reverse Polling
06 Continuous Polling
07 MH Only
08 Shorten Protocol
09 Call-Back Message
10 Personal ID
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Purpose
Change the monitoring range:
ON: Off-Hook to DCN OFF:
Off-Hook to DIS
Reports handshaking and
protocol data for each
communication
Selecting automatic printout of
the Message Confirmation Report
upon detecting a communication
error
Selects the printing of TSI
data from the sending FAX on
the received picture.
printed at the leading edge of
the first page only.
Selects the reverse poll
function
Placing a document on the ADF
tray selects the polling mode
without the need to operate the
SELECT FUNCTION Key. Allows
continuous loop RX poll of
auto-dial group.
Limits image compression to
Modified Huffman Code only.
Shortens protocol to save
transmission time.
In a case where the remote
station does not respond to a
Voice Request a fax is sent
requesting a voice callback.
Enables the transmission of the
upper 16 characters of the
sender ID as the Personal ID.
The Personal ID will appear on
the remote station's display
and on the remote station's
Activity Report.
Defaul
t
OFF
OFF
OFF
ON
TSI is
OFF
OFF
OFF
ON
ON
ON
Page: 190