Printer Control Board (Pcnt-150) - OKIDATA OF1000 Service Manual

3.2.08 Printer Control Board (PCNT-150)

1. Perform these procedures:
3.2.01
3.2.03
3.2.04
3.2.05
2. Detach the cables from the connectors (see below).
3. Remove the two screws (1).
4. Remove the printer control board (2).
P/N N/A Screw B.2.07
P/N 55073601 PCB: PCNT-150
P/N 56628801 Cable: MCNT-PCNT
P/N N/A Cable: PCNT-PSUB
P/N 56628302 Cable: PCNT-Image Sensor
P/N 56629101 Cable: LED-PCNT
P/N 56628603 Cable: PC1+PC2-PCNT
P/N 56628605 Cable: PCNT-PWU
P/N 56628507 Cable: PCNT-2nd Tray PCB
P/N 56510702 Motor: Registration Stepper
Chapter 3 Maintenance & Disassembly
B.2.07
B.2.16
B.2.17
B.2.17
B.2.17
B.2.17
B.2.17
B.2.17
B.2.05
Service Guide OF1000
, B.2.17
Page: 74