Pinch Roller - OKIDATA OF1000 Service Manual

3.2.29 Pinch Roller

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.25
3.2.28
2. Press down and hold the left (1) and right (2) ADF pinch springs.
3. Press down and release the pinch roller (2).
4. Remove the pinch roller (3).
NOTE:
Cleaning
Clean the pinch roller as necessary.
cleaning details .
P/N 50406201 Roller: Pinch
P/N 50925201 Spring: ADF Pinch (Left)
P/N 50925202 Spring: ADF Pinch (Right)
P/N 51112501 Roller: Pinch Shaft
Chapter 3 Maintenance & Disassembly
Refer to Section 3.4 of this Service Handbook for
RSPL B.2.12
RSPL B.2.12
RSPL B.2.12
RSPL B.2.12
Service Guide OF1000
Page: 95