Printer Unit Print Test - OKIDATA OF1000 Service Manual

4.6.08 Printer Unit Print Test

This print test is used to test the printer unit independent of the facsimile device.
if the Printer Unit Print Test should fail.
Procedure
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press LEFT ARROW
4. Press the "8" Key on the ten-key pad.
5. Press LEFT ARROW.
6. Press STOP once to halt printing.
Printing will continue until the print buffer is empty.
7. Press STOP three times to exit the test.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
twice.
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 177
Refer to RAP 14