Lower Feed Roller Assembly - OKIDATA OF1000 Service Manual

3.2.33 Lower Feed Roller Assembly

1. Perform these procedures:
3.2.01
3.2.09
3.2.11
3.2.12
3.2.15
3.2.16
3.2.20
3.2.21
3.2.25
3.2.32
2. Remove the lower feed roller assembly (1).
NOTE:
The assembly is made of the feed roller two, the Z17 gear, the ADF bearing, and the compression
washer. To replace any of these parts, order the assembly.
Lubrication
Lightly lubricate the Z17 gear.
details .
P/N 50406001 Roller: Lower Feed Assembly
P/N N/A Roller: Feed (2)
P/N N/A Gear: Z17 RSPL B.2.13
P/N N/A Bearing: ADF
P/N 50516401 Washer: Compression
Refer to Section 3.5 of this Service Handbook for lubrication
RSPL B.2.13
RSPL B.2.13
RSPL B.2.13
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
RSPL B.2.13
Page: 99