RAP 22E: Repetitive Spaced Marks on Printed Output
NOTE:
If repetitive spaced marks are on the output upon receiving a fax, perform local copy before
assuming that your Okifax 1000 is defective. It is possible that the transmitting facsimile is
defective.
START.
Identify the problem by measuring the distance between marks:
Distance Between
Marks
1.66 inches
3.71 inches
2.27 inches
1.56 inches
1.24 inches
2.01 inches
2.47 inches
2.23 inches
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Corrective Action
Replace or clean the image drum cartridge.
Replace the image drum cartridge.
Replace the image drum cartridge.
Replace the image drum cartridge.
Replace the image drum cartridge.
Replace the transfer roller.
Replace the fusing unit assembly.
Replace the pressure roller.
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 165