Service Codes List (Activity Report) - OKIDATA OF2600 Service Manual

2.7.02 Service Codes List (Activity Report)

The Service Codes are the same for the Okifax 2200, Okifax 2400, and Okifax 2600.
Service Code Type
Normal Termination Service Code (in all modes)
Error While Dialing Phase A
G3 Transmission Phase B
G3 Reception Phase C
G3 Transmission Phase D
Miscellaneous Service Codes
Code Description
0000 Successful end of communication
1080 STOP key has been pressed while calling a remote fax
10A2 Busy tone detected
14A3 Second dial tone not detected
14C0 Dial tone not detected
14C1 Line current not detected
14C2 Calling-and-waiting for line connection time out
14C3 Dialing limit time out
21A0 Received signal other than DIS/DTC
21A1 Contents of received DIS/DTC are faulty
21A2 TCF is sent three times and DIS/DTC is received each time in
response
21A3 TCF is sent three times and the receiver has not responded
21A4 TCF fall-back is not possible
Service Guide OF2200/2400/2600
Chapter 2 Failure Analysis
Service Code Group
0000
1xxx
2xxx
3xxx
41xx
6xxxx and 9xxx
Page: 97