Release Guide Assembly - OKIDATA OF1000 Service Manual

3.2.37 Release Guide Assembly

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.17
3.2.20
3.2.21
3.2.25
2. Use a needle nose pliers to remove the spring (1).
3. Release the tabs (2) and remove the release guide assembly (3).
NOTE:
The assembly includes the release guide, the eject roller, and the bias spring. To replace
any of the parts, order the assembly.
P/N 50925401 Spring: Release Guide
P/N 51012801 Guide: Release Assembly
P/N N/A Guide: Release
P/N N/A Roller: Eject RSPL B.2.10
P/N N/A Bias: Spring RSPL B.2.10
P/N 52202801 Mylar: Exit Strip
RSPL B.2.10
RSPL B.2.10
RSPL B.2.10
RSPL B.2.10
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Page: 103