Rap 21C: Printer Alarm 2 - OKIDATA OF1000 Service Manual

RAP 21C: Printer Alarm 2

START
Power the Okifax 1000, Off then On again.
Is the problem resolved?
YES End of procedure.
NO Is the harness between CN1 of the PCNT-150 board and CN3 of the MCNT-150 board
undamaged and properly connected?
NO Replace or properly attach the harness.
YES Are all connections on the PCNT-150 properly attached?
YES Replace the PCNT-150 board.
NO Re-seat all of the connectors.
Is the problem resolved?
YES End of procedure.
NO Contact Okidata Technical Support.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 155