Package Shelf Assembly - OKIDATA OF1000 Service Manual

3.2.05 Package Shelf Assembly

1. Perform these procedures:
3.2.01
3.2.03
3.2.04
2. Remove the four screws (1).
3. Pull the package shelf (2) out slightly.
4. Remove the three screws (3) holding the tie wraps down.
5. Detach the cables from the thirteen connectors (Not identified).
6. Remove the package shelf assembly, with boards.
P/N N/A Package Shelf Assembly
P/N N/A Bracket: Line
P/N N/A Guide: Package
P/N N/A Insulator (2) B.2.07
P/N N/A Plate: Shield (L)
P/N N/A Screw B.2.07
B.2.07 , B.2.08
B.2.07 , B.2.08
B.2.07 , B.2.08
, B.2.08
B.2.07 , B.2.08
, B.2.08
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Page: 71