Read Station Sensor Assembly (Pc2) - OKIDATA OF1000 Service Manual

3.2.31 Read Station Sensor Assembly (PC2)

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.25
3.2.26
2. Disconnect the connector (1).
3. Using a flat-head screwdriver, press and hold the latch (2) and remove the read station sensor
assembly (3).
NOTE:
The same photo sensor is used in both the document detect assembly and the read station
assembly.
P/N 50218202 Assembly: Read Station Sensor
P/N 56628603 Cable: PC 1+2-PCNT
P/N N/A Lever: PC2 RSPL B.2.12
P/N N/A Holder: Sensor
P/N N/A Photo Sensor
RSPL B.2.12
RSPL B.2.12
RSPL B.2.12
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
RSPL B.2.12
(PC2)
, B.2.17
Page: 97