Main Control Board (Mcnt-150) - OKIDATA OF1000 Service Manual

3.2.07 Main Control Board (MCNT-150)

1. Perform these procedures:
3.2.01
3.2.03
3.2.04
3.2.05
2. Detach the cables from connectors (see below).
3. Remove the two screws (1).
4. Remove the main control board (2).
P/N 56628501 Cable: MCNT-NCU (15 Pin)
P/N 56628801 Cable: MCNT-PCNT
P/N 57001302 Speaker
P/N 56628508 Cable: MCNT-PWU (12 Pin)
P/N 56628505 Cable: MCNT-Hook (2 Pin)
P/N 56628701 Cable: OPE-MCNT
P/N N/A Screw RSPL B.2.07
P/N 55073701 PCB: MCNT-150
B.2.16
B.2.16
B.2.02 , B.2.16
B.2.16
B.2.16
B.2.16
RSPL B.2.07
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Page: 73