Table of Contents
Advertisement
1.6 Reports and Lists
Table 1.6.1 (1/23) Reports and Lists Specifications
Table 1.6.1 shows Reports and Lists Specifications.
Note :
F +OT:
Press
FP: Function program setting
TF:
Technical function setting
No.
Item
______________________________________________________________________
1
Call-back message
respond to voice request of the transmitter
function.
Call-back Message Format: (Example)
2
Sender ID*
Fax machines use this information
to identify themselves during
communications. In the United
States and most other countries,
programming this information into
your fax machine is a legal
requirement (for more information,
the "Federal Communica-
tions Commission Requirements
Users" at the beginning of
this manual.
FUNCTION
and One-touch key
the receiver only when the receiver does not
Number must be programmed to enable this
alphanumeric message, such as
characters.
Sender ID Format: (Example)
Service Guide OF1050/2350/2450
Chapter 1 General Information
Specifications
The transmitter sends a call-back message to
(Feeder Transmit only)
Note : Sender Id plus Call Back Telephone
(1) Date and time
(2) Sender ID
(3) CSI/Personal ID
(4) Letters PLEASE CALL BACK
(5) Sender ID
(6) Senders call back telephone number
The fax can transmit a programmed
company's name, consisting of up to 32
* (Outside only)
Page: 15
refer to
for End
Advertisement
Table of Contents
