3.2.43 Fuser Unit Assembly
WARNING:
Allow the fuser unit assembly to cool before servicing.
1. Perform these procedures:
3.2.01
3.2.02
3.2.09
3.2.15
3.2.16
3.2.42
2. Remove the four screws (1).
3. Remove the fuser unit assembly (2).
NOTE:
Installation
Reset the fuser counter when installing a new fuser unit.
Handbook
for further details.
Lubrication
Lightly lubricate the fuser gear.
details
.
P/N 50217501 Unit: Fuser Assembly (120V)
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Refer to Section 3.5 of this Service Handbook for lubrication
RSPL B.2.04
Refer to Section 4.8 of this Service
Page: 109