Reduction And Stepper Motor Idle Gears - OKIDATA OF1000 Service Manual

3.2.45 Reduction and Stepper Motor Idle Gears

1. Perform these procedures:
3.2.01
3.2.02
3.2.03
3.2.04
3.2.05
3.2.09
3.2.11
3.2.15
3.2.16
3.2.17
3.2.28
3.2.36
3.2.39
3.2..40
3.2.41
3.2.42
3.2.43
3.2.44
2. Release the two latches (1) and remove the motor assembly (2).
3. Remove the reduction gear.
4. Remove the stepper motor idle gears.
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Page: 111