RAP 21B: Printer Alarm 1
START
Power the Okifax 1000, Off then On again. Is the problem resolved?
YES End of procedure.
NO Is the harness between CN1 of the PCNT-150 board and CN3 of the MCNT-150 board
undamaged and properly connected?
NO Replace or properly attach the harness.
YES Replace the PCNT-150 board.
Is the problem resolved?
YES End of procedure.
NO Replace the MCNT-150 board.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 154