Voice Message Test - OKIDATA OF1000 Service Manual

4.6.09 Voice Message Test

This voice message test verifies the proper operation of the Okifax 1000s voice message
capability. All languages are tested, regardless of the selected language. The voice message
function is used in the TEL/FAX Mode.
fail.
Procedure
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press LEFT ARROW
4. Press the "9" Key on the ten-key pad.
5. Press LEFT ARROW.
The following message will be displayed.
9: VOICE MSG. TEST
MESSAGE SENDING
6. Press STOP four times to exit the test.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Refer to RAP 15
twice.
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
should the Voice Message Test
Page: 178