Led Test; Tone Test; Local Diagnostic Testing - OKIDATA OF1000 Service Manual

4.6 LOCAL DIAGNOSTIC TESTING

The operator or service technician can perform the following local diagnostic tests by using the
Ten-Key Operation Pad.
· Self-Diagnosis
· Scan Operation / CIS Calibration
· LED Test
· Tone Test
· High-Speed Modem Transmission Test
· High-Speed Modem Reception Test
· Multi-Frequency Tone Test
· Printer Unit Print Test
· Voice Message Test
NOTE:
Before running the local diagnostic tests, the Okifax 1000 must be in the idle mode.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 169