Sensor Roller Assembly - OKIDATA OF1000 Service Manual

3.2.26 Sensor Roller Assembly

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.25
2. Remove the sensor roller assembly (1).
NOTE:
The sensor roller assembly consists of the sensor roller, the Z22 gear, and the bearing. To
replace any of these parts, order the assembly.
Cleaning
Clean the sensor roller assembly as necessary.
for cleaning details
Lubrication
Lightly lubricate the Z22 gear.
Refer to Section 3.5 of this Service Handbook for lubrication details
P/N 50405701 Roller: Sensor Assembly
P/N N/A Roller: Sensor
P/N N/A Bearing RSPL B.2.11
P/N N/A Gear: Z22 RSPL B.2.11
P/N 50516401 Washer: Compression
.
RSPL B.2.11
RSPL B.2.11
RSPL B.2.11
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Refer to Section 3.4 of this Service Handbook
Page: 92
.