Sub Roller Assembly - OKIDATA OF1000 Service Manual

3.2.27 Sub Roller Assembly

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.25
2. Remove the sub-roller assembly (1).
NOTE:
The sub roller assembly consists of the sub roller and the sub roller shaft. To replace
either of the parts, order the assembly.
Cleaning
Clean the sub roller assembly as necessary.
cleaning details .
Lubrication
Lightly lubricate the gearing on the sub roller shaft.
Handbook for lubrication details
P/N 50406101 Roller: Sub Assembly
P/N N/A Sub Roller RSPL B.2.11
P/N N/A Shaft: Sub Roller
Refer to Section 3.4 of this Service Handbook for
.
RSPL B.2.11
RSPL B.2.11
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Refer to Section 3.5 of this Service
Page: 93