Printing Process - General Information - OKIDATA OF1000 Service Manual

Page: 48
Service Guide OF1000
Chapter 2 Principles of Operation
2.5 PRINTING PROCESS
2.5.01 General Information
Hopping and feeding are controlled by a single registration motor.
Turning the registration motor in the "A" direction drives the hopping roller.
Turning the registration motor in the "B" direction drives the registration roller.
The registration gear and hopping gear contain one-way bearings. Turning each of these gears in
the reverse direction will NOT turn the corresponding roller.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)