Hopping - OKIDATA OF1000 Service Manual

Page: 50
Service Guide OF1000
Chapter 2 Principles of Operation

2.5.02 Hopping

Hopping loads paper from the paper cassette.
During the hopping operation, the registration motor turns in a clockwise direction. This motor
drives the hopping roller, which in turn advances the paper until the inlet sensor 1 switches ON.
The registration gear turns, but the one-way bearing does not allow the registration roller to turn.
After inlet sensor 1 switches ON, the paper is advanced a predetermined length (until the paper
reaches the registration roller).
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)