Eject Roller Assembly - OKIDATA OF1000 Service Manual

3.2.40 Eject Roller Assembly

1. Perform these procedures:
3.2.01
3.2.03
3.2.04
3.2.05
3.2.09
3.2.15
3.2.16
3.2.20
3.2.21
3.2.36
3.2.37
2. Open the copy stacker (1).
3. Release the latch (2) and remove the eject roller assembly (3).
NOTES:
Lubrication
Lightly lubricate the contact points of the roller shaft.
Handbook for lubrication details
P/N 53342801 Roller: Eject Assembly
P/N 51229201 Gear: Eject Roller Idle
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
Refer to Section 3.5 of this Service
.
RSPL B.2.04
RSPL B.2.04
Page: 106