Clearing The Random Access Memory (Ram) - OKIDATA OF1000 Service Manual

4.9 CLEARING THE RANDOM ACCESS MEMORY (RAM)

CAUTION:
Clearing the RAM will cause the loss of all previously programmed user and service data. This
data will be reset to factory default settings. To prevent the loss of your customized settings, print
a copy of the Configuration Report, Service Default Report and Telephone Directory Report
before clearing the RAM.
4.9.01 General Information
In order to CLEAR the Random Access Memory (RAM), perform the following actions.
1. Press SELECT FUNCTION.
2. Press COPY twice.
3. Press the "3" Key.
The following message will be displayed.
SYSTEM RESET ?
4. Press LEFT ARROW.
5. Press the appropriate key.
LEFT ARROW: ALL DATA CLR. - or
"2" Key: LOCATION DATA CLR. - or
"3" Key: CONFIG DATA CLR. - or
"4" Key: TX PAGES CLR. - or
"5" Key: RX PAGES CLR.
6. Press LEFT ARROW.
The following message will be displayed.
ARE YOU SURE?
7. Press LEFT ARROW
8. Press SELECT FUNCTION
to CLEAR the selected data.
to exit the procedure.
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 188