Document Detect Assembly (Pc1) - OKIDATA OF1000 Service Manual

3.2.30 Document Detect Assembly (PC1)

1. Perform these procedures:
3.2.01
3.2.09
3.2.15
3.2.16
3.2.25
3.2.28
2. Disconnect the connector (1).
3. Press in the direction of the arrow and hold the latch (2) then remove the document detect
assembly (3).
NOTE:
The same photo sensor is used in both the document detect assembly and the read station
assembly.
P/N 50218101 Assembly: Document Detect (PC 1)
P/N 56628603 Cable: PC 1+2-PCNT
P/N N/A Lever: PC1 RSPL B.2.12
P/N N/A Bracket: PC1
P/N N/A Photo Sensor
RSPL B.2.12
RSPL B.2.12
RSPL B.2.12
Service Guide OF1000
Chapter 3 Maintenance & Disassembly
RSPL B.2.12
, B.2.17
Page: 96