RAP 18: Multiple Documents Feed
START
Remove the original documents, fan them, then load the documents again.
Is the problem resolved?
YES End of procedure.
NO Clean the separation rubber.
Is the problem resolved?
YES End of procedure.
NO Push on the separation rubber. Does it spring back to its original position?
NO Replace the ADF assembly.
YES Replace the separation rubber.
Is the problem resolved?
YES End of procedure.
NO Check the tension of the ADF spring.
Is the problem resolved?
NO Replace the ADF assembly.
YES End of procedure.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)
Service Guide OF1000
Chapter 4 Failure & Repair Analysis
Page: 149