Multi-Bypass Tray Paper Settings; Paper Size And Type - Kyocera KM-3035 Operation Manual

Section 6 COPIER MANAGEMENT FUNCTIONS

3. Multi-bypass tray paper settings

(1) Paper size and type

Perform the following procedure in order to use the multi-bypass tray
to feed copy paper.
1 With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2 Touch the "Bypass setting" key.
The "Bypass setting" screen will be displayed.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
Metric specifications
Default setting / Counter
Default setting
Copy
default
Machine Document
default Management
3 Specify the desired method of selecting the paper size.
If you select "Auto Detection" here, select the desired unit of
measure ("Centimeter" or "Inch") as well, and then go directly
to step 5. If you want to select a custom paper size, touch the
"Input size" and then go to the next step.
Inch specifications
Default setting / Counter
Bypass setting
Paper size
Auto
Detection
Input size
Others
Standard
Metric specifications
Default setting / Counter
Bypass setting
Paper size
Auto
Detection
Input size
Others
Standard
6-44
Language Management
Bypass BOX Counter
setting Management check
Register Print User
orig. size report Adjustment
Language Management
Bypass Hard Disk Counter
setting Management check
Register Print User
orig. size report Adjustment
A4
Back
Unit Paper type
Centimeter Auto
Inch
Back
Unit Paper type
Select
Centimeter Auto
paper type
Inch
4 Touch the "+" key or the "-" key to change each of the
displayed sizes (length and width) to the desired settings.
* In metric specification copiers, the desired sizes can also
be entered directly by touching the corresponding "#-Keys"
key and then using the keypad.
Inch specifications
Default setting / Counter
Bypass setting
Paper size
Auto
Detection
Input size
Others
Standard
Metric specifications
Default setting / Counter
Bypass setting
Paper size
Auto
Detection
Input size
Others
Standard
End
5 Designate the paper type by pressing the "Select paper type"
key or the "Auto" key, as desired.
If you pressed the "Select paper type" key, proceed to the
next step.
If you pressed the "Auto" key, proceed directly to step 7.
Inch specifications
Default setting / Counter
Bypass setting
End
Paper size
Auto
Detection
Input size
Others
Standard
Metric specifications
Default setting / Counter
Bypass setting
Paper size
Auto
Detection
Input size
Others
Standard
Close
Select
paper type
Auto
Close
Auto
( 3 7 / ~ 11 5 / ) ( 5 7 / ~17)
8 8 8
Paper type
" "
Y 11 11 / X 16 9 /
16 16
+
+
– –
# keys # keys
(98~297) (148~432)
297 420
Y X
mm mm
+ +
– –
#-Keys #-Keys
Unit Paper type
Centimeter
Inch
Unit Paper type
Centimeter
Inch
297x432mm
Close
Back
Select
Auto
paper type
Auto
Back Close
Paper type
Select
Auto
paper type
Auto
A4
Back Close
Select
Auto
paper type
Auto
Back Close
Select
Auto
paper type
Auto