Loading Paper In The Multi Purpose Tray - Kyocera ECOSYS PA6000 Series Operation Manual

Preparation before Use > Loading Paper

Loading Paper in the Multi Purpose Tray

The multi purpose tray will hold up to 100 sheets of plain paper (80 g/m
For details of the supported paper sizes, refer to the following:
Choosing the Appropriate Paper (page 11-15)
For the paper type setting, refer to the following:
Media Type Set. (page 8-9)
Be sure to use the multi purpose tray when you print on any special paper.
IMPORTANT
• If you are using a paper weight of 106 g/m
the paper you are using.
• Remove each transparency from the top tray as it is printed. Leaving transparencies in the top tray
may cause a paper jam.
The capacity of the multi purpose tray is as follows.
• Plain paper (80 g/m
• Thick paper (106 to 220 g/m
• Thick paper (104.7 g/m
• Hagaki (Cardstock): 1 sheets
• Envelope DL, Envelope C5, Envelope #10, Envelope #9, Envelope #6 3/4, Envelope Monarch, Youkei 4,
Youkei 2: 
5 sheets
• OHP film: 1 sheet
NOTE
• When you load custom size paper, enter the paper size by referring to the following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) or the Large Capacity Feeder (Bulk
Feeder Setting)) (page 3-17)
• When you use special paper such as transparencies or thick paper, select the media type by referring to the
following:
Paper Size and Media Type for the Multi Purpose Tray (MP Tray Setting) or the Large Capacity Feeder (Bulk
Feeder Setting)) (page 3-17)
1
Open the multi purpose tray.
2
), recycled paper or color paper: 100 sheets
2
): 5 sheets
2
): 100 sheets
2
or more, set the media type to Thick and set the weight of
3-11
2
).