There Is A Regular Error Between The Centers Of The Original And Copy Image When The Dp Is Used; There Is A Regular Error Between The Leading Edges Of The Original And Copy Image When The Dp Is Used; A Line Appears At The Leading Or Trailing Edge - Kyocera TASKalfa 620 Service Manual

2KN/2KP

(20) There is a regular error between the centers of the original and copy image when the DP is used.

Copy example
Misadjusted center line.

(21) There is a regular error between the leading edges of the original and copy image when the DP is used.

Copy example
Misadjusted original scanning start
position.

(22) A line appears at the leading or trailing edge.

Copy example
70 mm
(23) A line appears at the leading or trailing edge.
Copy example
64 mm
64 mm
64 mm
1-4-58
Causes
Causes
Causes
Misadjusted of the speeds of
the motors.
Causes
Misadjusted of the speeds of
the motors.
Check procedures/corrective measures
Readjust the DP center line (see page 1-3-31).
Check procedures/corrective measures
Readjust the DP leading timing (see page 1-3-30).
Check procedures/corrective measures
Change the setting for TC Setting (Uneven Image) of main-
tenance item U053 (see page 1-3-20).
Check procedures/corrective measures
Change the setting for TC Setting (Uneven Image) of main-
tenance item U053 (see page 1-3-20).