O E Profile; Introduction To Poe Profile; Poe Profile Configuration Tasks - 3Com 7757 Configuration Manual

66
Introduction to PoE
Profile
PoE Profile
Configuration Tasks
P E P
O ROFILE
On a large-sized network or a network with mobile users, to help network
administrators to monitor the PoE features of the switch, Switch 7750 Ethernet
switches provide the PoE profile features.
Features of PoE profile:
Various PoE profiles can be created. PoE policy configurations applicable to
■
different user groups are stored in the corresponding PoE profiles. These PoE
profiles can be applied to the ports used by the corresponding user groups.
When users connect a PD to a PoE-profile-enabled port, the PoE configurations
■
in the PoE profile will be enabled on the port.
Table 589 Configure PoE profile
Operation
Enter system view
Create a PoE profile
Configure the Enable the PoE feature on a
relevant features port
in PoE profile
Configure PoE mode for
Ethernet ports
Configure the PoE priority for
Ethernet ports
Configure the maximum
power for Ethernet ports
Return to system view.
C
ONFIGURATION
Command
system-view
poe-profile
profile-name
poe enable
poe
mode { signal |
spare }
poe
priority { critical |
high | low }
poe max-power
max-power
quit
Description
-
Required
Enter PoE profile view
while creating the PoE
profile
Required
The PoE feature on a
port is enabled by
default
Optional
By default, the PoE
mode is set to signal.
Optional
By default, PoE priority
is set to low.
Optional
By default, the
maximum power is set
to 15,400 milliwatts.
-