Network diagram
Figure 99
Network diagram for HABP configuration
GE2 /0/1
Switch A
Configuration procedure
1 Configure Switch B.
# Enable HABP globally.
<SW7750>system-view
[SW7750]habp enable
# Configure the HABP server.
[SW7750]habp server vlan 2
# Enable the 802.1x globally.
[SW7750]dot1x
802.1x is enabled globally.
# Enable the 802.1x on GigabitEthernet2/0/2.
[SW7750]interface GigabitEthernet 2/0/2
[SW7750-GigabitEthernet2/0/2]dot1x
802.1x is enabled on port GigabitEthernet2/0/2.
2 Configure Switch A
# Enable HABP globally.
<SW7750>system-view
System View: return to User View with Ctrl+Z.
[SW7750]habp enable
Verify the configuration on the server.
[SW7750]display habp table
MAC
Holdtime
000f-e200-5004
000f-e200-5002
GE2/0/2
Switch B
Receive Port
41
GigabitEthernet2/0/2
41
GigabitEthernet2/0/2
HABP Configuration Example
411