3Com 7757 Configuration Manual page 794

794 C 72: F S
HAPTER ILE YSTEM
Prompt Mode
Configuration
File System
Configuration Example
M
ANAGEMENT
Table 630 Storage device-related operations
Operation
Format a storage device
Restore a storage device
You can set the file system prompt mode to be alert or quiet. When in the alert
mode, the file system prompts for confirmation when you perform irreversible
operations (such as deleting a file completely or overwriting a file). If you are in the
quiet mode, you are not prompted when you execute the operations.
Table 631 lists the operations to configure the file system prompt mode.
Table 631 Configuration on prompt mode of file system
Operation
Enter system view
Set the file system
prompt mode
# Display all the files in the root directory of the file system on the local unit.
<SW7750> dir /all
Directory of flash:/
0 -rw-
1 -rw- 16215134
2 -rw-
3 -rw-
4 drw-
5 drw-
6 -rw- 11779
7 -rw- 19307
8 -rw-
31877 KB total (15876 KB free)
# Create a directory named test.
<SW7750> mkdir test
.
%Created dir flash:/test.
# Copy flash:/config.cfg as flash:/test/1.cfg.
<SW7750> copy flash:/config.cfg flash:/test/1.cfg
......
%Copy file flash:/config.cfg to flash:/test/1.cfg...Done.
# Display the file information.
<SW7750> dir /all
Directory of flash:/
Command
format device
fixdisk device
Command
system-view
file prompt { alert | quiet }
4 Mar 09 2006 13:59:19
Apr 04 2006 16:36:20
483 Apr 20 2006 14:50:54
3980 Apr 21 2006 15:08:29
- Apr 16 2006 11:18:17
- Apr 10 2005 19:07:59
Apr 05 2006 10:23:03
Apr 16 2006 11:15:55
66 Apr 05 2006 11:32:28
Description
Required
Optional
Description
-
Required
By default, the file system prompt
mode is alert.
snmpboots
S7750.app
diaginfo.txt
config.cfg
hj
dd
test.bak
1.txt
temp1