3Com 7757 Configuration Manual page 255

3com switch 7750 family
Hide thumbs Also See for 7757:
Table of Contents

Advertisement

Edge Port Configuration
parameter. It depends on the physical state of the port and network structure. You
can configure this parameter according to the network.
Configuration procedure (in system view)
Table 181 Configure the maximum transmitting speed for specified ports in system view
Operation
Enter system view
Configure the maximum
transmitting speed for
specified ports
Configuration procedure (in Ethernet port view)
Table 182 Configure the maximum transmitting speed in Ethernet port view
Operation
Command
Enter system view
system-view
Enter Ethernet port
interface interface-type
view
interface-number
Configure the
stp transmit-limit packetnum
maximum
transmitting speed
As the maximum transmitting speed parameter determines the number of the
configuration BPDUs transmitted in each Hello time, set it to a proper value to
avoid MSTP from occupying too many network resources. The default is
recommended.
Configuration example
# Set the maximum transmitting speed of Ethernet1/0/1 port to 5.
Configure the maximum transmitting speed in system view.
<SW7750> system-view
[SW7750] stp interface ethernet1/0/1 transmit-limit 5
Configure the maximum transmitting speed in Ethernet port view.
<SW7750> system-view
[SW7750] interface ethernet1/0/1
[SW7750-Ethernet1/0/1] stp transmit-limit 5
Edge ports are ports that neither directly connects to other switches nor indirectly
connects to other switches through network segments. After a port is configured
as an edge port, rapid transition is applicable to the port. That is, when the port
changes from blocking state to forwarding state, it does not have to wait for a
delay.
You can configure a port as an edge port in the following two ways.
Command
system-view
stp interface interface-list transmit-limit
packetnum
Root Bridge Configuration
Description
-
Required
The maximum
transmitting speed
of all Ethernet ports
on a switch
defaults to 10.
Description
-
-
Required
The maximum transmitting speed
of all Ethernet ports on a switch
defaults to 10.
255

Advertisement

Table of Contents
loading

This manual is also suitable for:

775077587754

Table of Contents