Configuring The Login Banner - 3Com 7757 Configuration Manual

72 C 6: L
HAPTER OGGING IN THROUGH THE
Configuring the Login
Banner
Configuration Procedure
Configuration Example
W - N
EB BASED ETWORK
Figure 18 Establish an HTTP connection between your PC and the switch
PC
4 Log into the switch through IE. Launch IE on the Web-based network
management terminal (your PC) and enter the IP address of the management
VLAN interface of the switch in the address bar. (Make sure the route between the
Web-based network management terminal and the switch is available.)
5 When the login authentication interface (as shown in Figure 19) appears, enter
the user name and the password configured in step 2 and click <Login> to bring
up the main page of the Web-based network management system.
Figure 19 The login page of the Web-based network management system
If a login banner is configured with the header command, when a user logs in
through Web, the banner page is displayed before the user login authentication
page. The contents of the banner page are the login banner information
configured with the header command. Then, by clicking <Continue> on the
banner page, the user can enter the user login authentication page, and enter the
main page of the Web-based network management system after passing the
authentication. If no login banner is configured by the header command, a user
logging in through Web directly enters the user login authentication page.
Table 32 Configure the login banner
Operation
Enter system view
Configure the banner to be
displayed when a user logs in
through Web
Network requirements
A user logs in to the switch through Web.
■
The banner page is desired when a user logs into the switch.
■
M S
ANAGEMENT YSTEM
HTTP
Connection
Command
system-view
header login text
Switch
Description
-
Required
By default, no login banner is
configured.