Telnet Configuration With Authentication Mode Being None - 3Com 7757 Configuration Manual

52 C 4: L
HAPTER OGGING IN THROUGH
Telnet Configurations
for Different
Authentication Modes
Telnet Configuration
with Authentication
Mode Being None
Configuration Procedure
T
ELNET
Table 22 lists Telnet configurations for different authentication modes.
Table 22 Telnet configurations for different authentication modes
Authentication
mode Telnet configuration
None Perform
common
configuration
Password Configure the
password
Perform
common
configuration
Scheme Specify to
perform local
authentication
or RADIUS
authentication
Configure user
name and
password
Manage VTY
users
Perform
common
configuration
Table 23 Telnet configuration with the authentication mode being none
Operation
Enter system view
Enter one or more VTY user
interface views
Configure not to authenticate
users logging into VTY user
interfaces
Description
Perform Optional
common Telnet
Refer to Table 21.
configuration
Configure the Required
password for
local
authentication
Perform Optional
common Telnet
Refer to Table 21.
configuration
AAA Optional
configuration
Local authentication is performed by
specifies
default.
whether to
perform local Refer to "Configuring RADIUS
authentication Authentication/Authorization
or RADIUS Servers" on page 525 for more.
authentication
Configure user Required
names and
■
passwords for
local/RADIUS
users
■
Set service type Required
for VTY users
Perform Optional
common Telnet
Refer to Table 21.
configuration
Command
system-view
user-interface vty
first-number [ last-number ]
authentication-mode none Required
The user name and password of a
local user are configured on the
switch.
The user name and password of a
remote user are configured on
the RADIUS server. Refer to user
manual of RADIUS server for
more.
Description
-
-
By default, VTY users are
authenticated after logging
in.