3Com 7757 Configuration Manual page 41

Configuration Example
Console Port Login Configuration with Authentication Mode Being None
Table 14 Console port login configuration with the authentication mode being none
Operation
Set the timeout time for the user
interface
Note that the command level available to users logging into a switch through the
None authentication mode depends on both the authentication-mode none
command and the user privilege level level command, as listed in the following
table.
Table 15 Determine the command level (A)
Scenario
Authentication
mode User type
None Users logging in
(authentication-mo through
de none) Console ports
Network requirements
Perform the following configuration for users logging in through the Console
port:
Do not authenticate users logging in through the Console port.
■
Commands of level 2 are available to users logging into the AUX user interface.
■
The baud rate of the Console port is 19,200 bps.
■
The screen can contain up to 30 lines.
■
The history command buffer can contain up to 20 commands.
■
The timeout time of the AUX user interface is 6 minutes.
■
Command
idle-timeout minutes
[ seconds ]
Command
The user privilege level level
command not executed
The user privilege level level
command already executed
41
Description
Optional
The default timeout time of
a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated if no
operation is performed in
the user interface within 10
minutes.
You can use the
idle-timeout 0 command
to disable the timeout
function.
Command level
Level 3
Determined by
the level
argument