3Com 7757 Configuration Manual page 716

716 C 63: C
HAPTER LUSTER
# Configure the hop count to collect topology to be 2.
[SW7750] ntdp hop 2
# Configure the delay time for topology-collection request packets to be
forwarded on member devices to be 150 ms.
[SW7750] ntdp timer hop-delay 150
# Configure the delay time for topology-collection request packets to be
forwarded through the ports of member devices to be 15 ms.
[SW7750] ntdp timer port-delay 15
# Configure the interval to collect topology information to be 3 minutes.
[SW7750] ntdp timer 3
# Enable the cluster function.
[SW7750] cluster enable
# Enter cluster view.
[SW7750] cluster
[SW7750-cluster]
# Configure an IP address pool for the cluster. The IP address in the IP address pool
starts from 172.16.0.1. The mask is 255.255.255.248.
[SW7750-cluster] ip-pool 172.16.0.1 255.255.255.248
# Specify a name for the cluster and create the cluster.
[SW7750-cluster] build aaa
[aaa_0.3Com-cluster]
# Add the attached two switches to the cluster.
[aaa_0.3Com-cluster] add-member 1 mac-address 00e0-fc01-0011
[aaa_0.3Com-cluster] add-member 17 mac-address 00e0-fc01-0012
# Configure the holdtime of the member device information to be 100 seconds.
[aaa_0.3Com-cluster] holdtime 100
# Configure the interval to send handshake packets to be 10 seconds.
[aaa_0.3Com-cluster] timer 10
# Configure the FTP Server, TFTP Server, Log host and SNMP host for the cluster.
[aaa_0.3Com-cluster] ftp-server 163.172.55.2
[aaa_0.3Com-cluster] tftp-server 163.172.55.2
[aaa_0.3Com-cluster] logging-host 69.172.55.4
[aaa_0.3Com-cluster] snmp-host 69.172.55.4
3 Configure the member devices (taking one member as an example)