3Com 7757 Configuration Manual page 539

AAA & RADIUS & HWTACACS Configuration Example 539
[SW7750-radius-cams] key authentication expert
[SW7750-radius-cams] server-type Extended
[SW7750-radius-cams] user-name-format with-domain
[SW7750-radius-cams] quit
# Associate the ISP domain with the RADIUS scheme.
[SW7750] domain cams
[SW7750-isp-cams] scheme radius-scheme cams
A Telnet user logging into the switch by a name in the format of userid @cams
belongs to the cams domain and will be authenticated according to the
configuration of the cams domain.
Local Authentication of
FTP/Telnet Users
n
The configuration procedure for the local authentication of FTP users is similar to
that of Telnet users. The following description only takes the local authentication
of Telnet users as example.
Network requirements
In the network environment shown in Figure 134, you are required to configure
the switch so that the Telnet users logging into the switch are authenticated
locally.
Network diagram
Figure 134 Local authentication of Telnet users
Internet
Telnet User Switch
Configuration procedure
Method 1: Using a local authentication scheme.
# Enter system view.
<SW7750> system-view
[SW7750]
# Adopt AAA authentication for Telnet users.
[SW7750] user-interface vty 0 4
[SW7750-ui-vty0-4] authentication-mode scheme
# Create and configure a local user named telnet.
[SW7750] local-user telnet
[SW7750-luser-telnet] service-type telnet
[SW7750-luser-telnet] password simple extended
[SW7750-luser-telnet] attribute idle-cut 300 access-limit 5