3Com 7757 Configuration Manual page 562

562 C 52: VRRP C
HAPTER ONFIGURATION
Network diagram
Figure 144 Network diagram for interface tracking configuration
VLAN-Interface3:
10.100.10.2
LSW A
VLAN-Interface2:
202.38.160.1
Configuration procedure
Configure Switch A.
■
# Configure VLAN 2.
<LSW-A> system-view
[LSW-A] vlan 2
[LSW-A-vlan2] port Ethernet 1/0/6
[LSW-A-vlan2] quit
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] ip address 202.38.160.1 255.255.255.0
[LSW-A-Vlan-interface2] quit
# Configure that the virtual router can be pinged.
[LSW-A] vrrp ping-enable
# Create a backup group.
[LSW-A] interface Vlan-interface 2
[LSW-A-Vlan-interface2] vrrp vrid 1 virtual-ip 202.38.160.111
# Set the priority for the backup group.
[LSW-A-Vlan-interface2] vrrp vrid 1 priority 110
Host B
10 .2.3.1
Internet
Virtual IP address
202 .38 .160 .111
202 .38 .160 .3
Host A
LSW B
VLAN-Interface2:
202.38.160.2