3Com 7757 Configuration Manual page 884

884 C 81: R
HAPTER EMOTE
- C
PING ONFIGURATION
Table 699 Configure SNMP test on remote-ping client
Operation
Configure the destination IP
address
Configure the source IP
address
Configure the source port
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Start the test
Display test results
7 Configuring TCP test on remote-ping client
Table 700 Configure TCP test on remote-ping client
Operation
Enter system view
Enable the remote-ping client
function
Create a remote-ping test
group and enter its view
Command
destination-ip ip-address
source-ip ip-address
source-port port-number
count times
history-records number
frequency interval
timeout time
tos value
test-enable
display remote-ping results
[ admin-name operation-tag ]
Command
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation- tag
Description
Required
By default, no destination
address is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Optional
By default, each test makes
one probe.
Figure 237 Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Optional
By default, a probe times out
in three seconds.
Optional
By default, the service type is
zero.
Required
Required
You can execute the
command in any view.
Description
-
Required
By default, the remote-ping
client function is disabled.
Required
By default, no test group is
configured.