Configuring A Large-Scale Bgp Network - 3Com 7757 Configuration Manual

3com switch 7750 family
Hide thumbs Also See for 7757:
Table of Contents

Advertisement

Configuring a
Large-Scale BGP
Network
Configuration
Prerequisites
Configuring BGP Peer
Group
BGP soft reset can refresh the BGP routing table and apply a new routing policy
without breaking the NGP connections.
In large-scale network, there are large quantities of peers. Configuring and
maintaining the peer becomes a big problem. Using peer group can ease the
management and improve the routes sending efficiency. According to the
different ASs where peers reside, the peer groups fall into IBGP peer groups and
EBGP peer groups. For the EBGP peer group, it can also be divided into pure EBGP
peer group and hybrid EBGP peer group according to whether the peers in the
EBGP group belong to the same exterior AS or not.
Community can also be used to ease the routing policy management. And its
management range is much wider than that of the peer group. It controls the
routing policy of multiple BGP routers.
In an AS, to ensure the connectivity among IBGP peers, you need to set up full
connection among them. When there are too many IBGP peers, it will cost a lot in
establishing a full connection network. Using RR or confederation can solve the
problem. In a large AS, RR and confederation can be used simultaneously.
Before configuring a large-scale BGP network, you need to ensure:
Network layer connectivity between adjacent nodes.
Before configuring a large-scale BGP network, you need to prepare the following
data:
Peer group type, name, and the peers included.
If you want to use community, the name of the applied routing policy is
needed.
If you want to use RR, you need to determine the roles (client, non-client) of
routers.
If you want to use confederation, you need to determine the confederation ID
and the sub-AS number.
Table 301 Configure BGP peer group
Operation
Enter system view
Enable BGP, and enter BGP view

Configuring a Large-Scale BGP Network

Command
Description
system-view
bgp as-number
365
-
Required
By default, the system does not
operate BGP.

Advertisement

Table of Contents
loading

This manual is also suitable for:

775077587754

Table of Contents