3Com 7757 Configuration Manual page 47

Console Port Login Configuration with Authentication Mode Being Scheme
Table 18 Console port login configuration with the authentication mode being scheme
Operation
Configure to authenticate users locally
or remotely
Configure the Set the baud rate
Console port
Set the check mode parity { even | mark |
Set the flow control
mode
Set the stop bits
Set the data bits
Configure the command level available
to users logging into the user interface
Make terminal services available to the
user interface
Set the maximum number of lines the
screen can contain
Command
authentication-mode
scheme [ command-
authorization ]
speed speed-value
none | odd | space }
flow-control { hardware
| none | software }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level
shell
screen-length
screen-length
47
Description
Required
The specified AAA
scheme determines
whether to authenticate
users locally or
remotely.
Users are authenticated
locally by default.
Optional
The default baud rate of
the AUX port (also the
Console port) is 9,600
bps.
Optional
By default, the check
mode of a Console port
is set to none, that is,
no check bit.
Optional
By default, a Console
port does not perform
flow control.
Optional
The default stop bits of
a Console port is 1.
Optional
The default data bits of
a Console port is 8.
Optional
By default, commands
of level 3 are available
to users logging into the
AUX user interface.
Optional
By default, terminal
services are available in
all user interfaces.
Optional
By default, the screen
can contain up to 24
lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.