3Com 7757 Configuration Manual page 40

40 C 3: L
HAPTER OGGING IN THROUGH THE
C P
ONSOLE ORT
Table 14 Console port login configuration with the authentication mode being none
Operation
Configure the Set the baud rate speed speed-value
Console port
Set the check
mode
Set the flow
control mode
Set the stop bits
Set the data bits
Configure the command level
available to users logging into the
user interface
Make terminal services available
Set the maximum number of lines
the screen can contain
Set the history command buffer
size
Command
parity { even | mark |
none | odd | space }
flow-control { hardware |
none | software }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level
shell
screen-length
screen-length
history-command
max-size value
Description
Optional
The default baud rate of an
AUX port (also the Console
port) is 9,600 bps.
Optional
By default, the check mode
of a Console port is set to
none, that is, no check bit.
Optional
By default, a Console port
does not perform flow
control.
Optional
The stop bits of a Console
port is 1.
Optional
The default data bits of a
Console port is 8.
Optional
By default, commands of
level 3 are available to users
logging into the AUX user
interface.
Optional
By default, terminal services
are available in all user
interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0 command
to disable the function to
display information in
pages.
Optional
The default history
command buffer size is 10.
That is, a history command
buffer can store up to 10
commands by default.