3Com 7757 Configuration Manual page 886

886 C 81: R
HAPTER EMOTE
- C
PING ONFIGURATION
Table 700 Configure TCP test on remote-ping client
Operation
Display test results
8 Configuring UDP test on remote-ping client
Table 701 Configure UDP test on remote-ping client
Operation
Enter system view
Enable the remote-ping client
function
Create a remote-ping test
group and enter its view
Configure the test type
Configure the destination
address
Configure the destination
port
Configure the source IP
address
Configure the source port
Command
display remote-ping results [
admin-name operation-tag ]
Command
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation- tag
test-type { udpprivate |
udppublic }
destination-ip ip-address
destination-port
port-number
source-ip ip-address
source-port port-number
Description
Required
The display command can be
executed in any view.
Description
-
Required
By default, the remote-ping
client function is disabled.
Required
By default, no test group is
configured.
Required
By default, the test type is
ICMP.
Required
This IP address and the one
configured on the
remote-ping server for
listening service must be the
same.
By default, no destination
address is configured.
Required in a Udpprivate
■
test
A Udppublic test is a UDP
■
connection test on port 7.
Use the
remote-ping-server
udpecho ip-address 7
command on the server to
configure the listening
service port; otherwise the
test will fail. No port
number needs to be
configured on the client;
any destination port
number configured on the
client will not take effect.
By default, no destination
■
port number is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
specified.