3Com 7757 Configuration Manual page 863

n
Specifying the APP to be
Adopted at Reboot
Updating the BootROM
Upgrading BootROM
along with the Upgrade
of ARP
Table 677 Schedule a reboot on the switch
Operation
Schedule a reboot on the switch, and
set the reboot waiting delay
There is at most one minute defer for scheduled reboot, that is, the switch will
reboot within one minute after reaching the specified reboot date and time.
APP is the host software of the switch. If multiple APPs exist in the Flash memory,
you can use the command here to specify the one that will be adopted when the
switch reboots.
The Switch 7750 Ethernet switches feature double Fabrics. When both the active
and standby Fabrics need to be upgraded, you need to specify the APP file used
for the next startup for the active Fabric and the standby Fabric respectively. Note
that, you must specify the APP file for the active Fabric from the Flash or CF
module of the active Fabric, and that for the standby Fabric from the Flash or CF
module of the standby Fabric.
Perform the following configuration in user view:
Table 678 Specify the APP to be adopted at reboot
Operation Command
Specify the APP to be boot boot-loader { primary | backup }
adopted at reboot file-url
You can use the BootROM application saved in the Flash memory of the switch to
update the running BootROM application. With this command, a remote user can
conveniently update the BootRom by uploading the BootROM to the switch
through FTP and running this command. The BootROM can be used when the
switch reboots.
Perform the following configuration in user view:
Table 679 Update the BootROM
Operation Command
Update the BootROM boot bootrom file-url slot slot-list
Upgrading BootROM along with ARP can ensure the best matching between the
version of current primary module and the version of BootROM, so as to avoid the
mal-operations of some functions and features caused by unmatched versions.
This feature supports two upgrade types:
Use the current boot file as the upgrade file of BootROM.
■
Specify the ARP file as the upgrade file of BootROM.
■
Device Management Configuration
Command
schedule reboot
delay { hhh:mm | mmm }
863
Description
Optional
Description
Optional
Description
Optional