3Com 7757 Configuration Manual page 878

878 C 81: R
HAPTER EMOTE
- C
PING ONFIGURATION
but for non ICMP tests, the remote-ping tests you configured cannot be executed
until fabric is disabled.
1 Configuring an ICMP test on remote-ping client
Table 694 Configure ICMP test on remote-ping client
Operation
Enter system view
Enable the remote-ping client
function
Create a remote-ping test
group and enter its view
Configure the test type
Configure the destination IP
address
Configure the source IP
address
Configure the test type
Configure the number of
probes per test
Configure the packet size
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
(ToS)
Start the test
Display test results
2 Configuring a DHCP test on remote-ping client
Command
system-view
remote-ping-agent enable
remote-ping
administrator-name
operation-tag
test-type icmp
destination-ip ip-address
source-ip ip-address
test-type icmp
count times
datasize size
history-records number
frequency interval
timeout time
tos value
test-enable
display remote-ping results
[ admin-name operation-tag ]
Description
-
Required
By default, the remote-ping
client function is disabled.
Required
By default, no test group is
configured.
Optional
By default, the test type is
ICMP.
Required
By default, no destination
address is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, the test type is
ICMP.
Optional
By default, each test makes
one probe.
Optional
By default, the packet size is
56 bytes.
Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Optional
By default, a probe times out
in three seconds.
Optional
By default, the service type is
zero.
Required
Required
Available in any view.