3Com 7757 Configuration Manual page 109

Table 60 Configure a voice VLAN to operate in manual mode
Operation
Enable the voice VLAN function for
the port
Bind a VLAN to the port as a voice
VLAN
Enable the voice VLAN legacy
function on the port
Set voice VLAN operation mode to
manual mode
Quit to system view
Add a Access
port in port
manual
mode to
the voice
VLAN
Trunk or
Hybrid
port
Quit to system view
Set an OUI address to be one that
can be identified by the voice
VLAN
Enable the voice VLAN security
mode
Set aging time for the voice VLAN voice vlan aging minutes
c
CAUTION:
If the Link Aggregation Control Protocol (LACP) is enabled for a port, the voice
■
VLAN feature can not be enabled for it.
Command
voice vlan enable
voice vlan vlan-id
voice vlan legacy
undo voice vlan mode auto
quit
Enter VLAN vlan vlan-id
view
Add the port interface-list
port to the
VLAN
Enter port interface interface-type
view interface-number
Add the port trunk permit vlan vlan-id
port to the
port hybrid vlan
voice VLAN
vlan-id { tagged | untagged }
Configure port trunk pvid vlan vlan-id
the voice
port hybrid pvid vlan vlan-id
VLAN to be
the default
VLAN of the
port
quit
voice vlan mac-address oui
mask oui-mask [ description
text ]
voice vlan security enable
Voice VLAN Configuration
Description
Required
By default, the voice
VLAN function is
disabled on a port.
Required
By default, no voice
VLAN is bound to a
port.
Optional
By default, voice
VLAN legacy is
disabled.
Required
The default voice
VLAN operation mode
is automatic mode.
-
Required
Optional
Refer to Table 58 to
determine whether or
not this operation is
needed.
-
Optional
If you do not set the
address, the default
OUI address is used.
Optional
By default, the voice
VLAN security mode is
enabled.
Optional
The default aging
time is 1,440 minutes.
109