Displaying Poe Supervision Information; Poe Psu Supervision Configuration Example - 3Com 7757 Configuration Manual

Displaying PoE
Supervision
Information
PoE PSU Supervision
Configuration
Example
# Display the DC output state of the PoE PSUs.
[SW7750] display poe-power dc-output state
# Display the DC output voltage/current values of the PoE PSUs.
[SW7750] display poe-power dc-output value
After the above configuration, you can execute the display commands in any
view to display the PoE operation of the switch and verify the configuration.
Table 588 Display PoE supervision information
Operation
Display the basic information
about the external PoE PSUs.
Display alarm information
about the PoE PSUs.
Display the number and state
of the AC power distribution
switches in the external PoE
PSUs.
Display the AC input state of
the external PoE PSUs
Display the DC output of the
external PoE PSUs
Display the DC output
voltage/current values of the
external PoE PSUs
For details about output information, refer to the Command Manual.
Network requirements
Insert a PoE-enabled module into slot 3 of the Switch 7750.
■
Connect IP phones to Ethernet3/0/1 through Ethernet3/0/48.
■
Set the AC input and DC output alarm thresholds to appropriate values.
■

Displaying PoE Supervision Information

Command
display supervision-module
information
display poe-power alarm
display poe-power switch
state
display poe-power ac-input
state
display poe-power
dc-output state
display poe-power
dc-output value
729
Description
You can execute the display
command in any view