Access Via Ethernet - MICRO-EPSILON optoCONTROL 2700 Operating Instructions Manual

5.2.4

Access via Ethernet

► Launch the web interface of the sensor.
Interactive web pages for configuring the sensor now appear in the web browser. The sensor is active and provides
measured values.
Fig. 5.1: Start Page after Accessing the Web Interface
Parallel operation with web browser and ASCII commands is possible; the last setting applies. Don't forget to save.
The appearance of the web pages can change depending on the functions and the peripherals. Each page contains pa­
rameter descriptions and thus tips for configuring the sensor.
optoCONTROL 2700
Operation
The horizontal navigation
contains the following func­
tions:
The Find function enables
●
time-saving access to func­
tions and parameters
Home. The web interface
●
automatically starts in this
view with measurement
chart, measurement config­
uration, and signal quality.
Settings. This menu con­
●
tains all sensor parameters.
●
Measurement chart.
Shows a measurement
chart with digital display or
a video signal.
Info. Contains information
●
about the sensor, including
the serial number, software
version, and an overview of
all sensor parameters.
Seite 31